WMC'2001

• Aspects of Manufacturing Systems (ISMS'2001)
  A Multi-Agent Bidding System For Task Assignment
  by Dr. Dan Burkolter, Swiss Federal Institute of Technology, Switzerland
  Dr. Jens Henoch, Swiss Federal Institute of Technology, Switzerland
  Dr. Eleni Pratsini, Swiss Federal Institute of Technology, Switzerland
  • Robustness and Flexibility as Performance Guarantee for Scheduling Problems in Uncertain Contexts
    by Dr. Mireille Jacomino, Laboratoire d'Automatique de Grenoble, France
    Dr. Andre Rossi, Laboratoire d'Automatique de Grenoble, France
  • Performance Evaluation of Manufacturing System Based on Coupling Methods. Industrial Study case 1
    by Dr. Livet Alexandre, Ecole Nationale Supérieure des Arts et Industries de Strasbourg, France
    Dr. Marc Barth, Ecole Nationale Supérieure des Arts et Industries de Strasbourg, France
    Dr. Denis Gien, Université Blaise Pascal, France
    Dr. Aicha Seklouli, Université Blaise Pascal, France
  • Valu.e- Networking
    by Dr.Ing. Joachim Klink, Fraunhofer Institute, Germany
    Dr.Ing. Wilfried Sihn, Fraunhofer Institute, Germany
  • Agility and Re-Configurability -Drivers, Approaches and Classification Methods
    by Dr. A.J. Medland, University of Bath, United Kingdom
    Dr. S.J. Steiner, University of Birmingham, United Kingdom
    Dr. A. de Vicq, AMTRI,United Kingdom
• Intelligent Systems in Manufacturing (ISMS'2001)
  Supervisor System For Detection And Treatment Of Failures In Machining Operations Using Petri Nets
  by Dr. Paulo Eigi Miyagi, Universidade de Sao Paulo, Escola Politécnica, Brazil
  Dr. Luis Alberto Riascos, Universidade de Sao Paulo, Escola Politécnica, Brazil
  • An Integrative Neural Approach for Concurrent Design of Products and Factories
    by Prof. Julio Macedo, Institut Stratégies Industrielles, Canada
  • A Simulation Environment for Multi-Autonomous System by Means of Multi-Microprocessor
    by Dr. Keiichi Ashida, Kobe University, Japan
    Dr. Kazuyuki Hanahara, Kobe University, Japan
    Dr. Yukio Tada, Kobe University, Japan
    Dr. Masaharu Ukeda, Kobe University, Japan
  • Design of an Intelligent Simulation Environment for Manufacturing Systems
    by Dr. M.A. Azadeh, University of Tehran, Iran
• Processes and Systems (ISMS'2001)
  Dynamic Facility Layout using Genetic Algorithm
  by Prof.Dr. Naoki Hirabayashi, Osaka Prefecture University, Japan
  Prof.Dr. Hiroyuki Nagasawa, Osaka Prefecture University, Japan
  Prof.Dr. Panitarn Peerapattana, Osaka Prefecture University, Japan
  • Acquisition of Heuristics for Dynamic Schedule Revision
    by Dr. Susumu Fujii, Kobe University, Japan
    Dr. Kazuhiko Kadosaki, Kobe University, Japan
    Dr. Haruhiko Suwa, Setsunan University, Japan
  • Integrating Maintenance into Production: Productive Services Priorities
    by Dr. José A. Duarte, Instituto Politécnico de Setubal, Portugal
  • Approaching Substantiation for the Reapplication of Disassembly Products Within Reactive Disassembly Planning
    by Dr. Alexander Huber, University of Magdeburg, Germany
    Dr. Jorge Marx- Gomez, University of Magdeburg, Germany
  • Development of a System for Concurrent Engineering Assembly plan Generation
    by B. Sc. Miljenko Hrman, University of Zagreb, Croatia
    Ph.D. Zoran Kunica, University of Zagreb, Croatia
    Ph.D. Božo Vranješ, University of Zagreb, Croatia
• Simulation (ISMS'2001)
  Optimal Stockyard Design of Mining Production Systems
  by Dr. Media A. Ayu, The Australian National University, Australia
  Dr. Michael Cardew-Hall, The Australian National University, Australia
  Dr. Brenan J. McCarragher, The Australian National University, Australia
  • Prediction Of Shop Floor Performance Using A Flexible Manufacturing Simulator
    by Dr. Andy Lung, Kingston University, United Kingdom
    Dr. Habtom Mebrahtu, Anglia Polytechnic University, United Kingdom
  • An EXPRESS Meta Model for Sharing and Exchanging Flexible Manufacturing Resources Information
    by Dr. Omar López-Ortega, Hidalgo State University, Mexico
    Dr. Gilberto Pérez-Lechuga, Hidalgo State University, Mexico
  • Full Dynamic Model of a Hybrid Seven-bar System
    by Dr. M. Deng, Exeter University, United Kingdom
    Dr. M.G. Gilmartin, Liverpool John Moores University, United Kingdom
    Dr. T.C. Yang, University of Sussex, United Kingdom
    Dr. Hongnian Yu, Exeter University, United Kingdom
  • Petri net Modelling and Witness Simulation of Manufacturing Systems
    by Dr. S. Lloyd, University of Sussex, United Kingdom
    Dr. D. Rigas, University of Branford, United Kingdom
    Dr. Hongnian Yu, Exeter University, United Kingdom
  • A Computational Framework for Evaluating Agility
    by Dr. Farley S. M. Nobre, University of Birmingham, United Kingdom
    Dr. S.J. Steiner, University of Birmingham, United Kingdom
• Simulation and Intelligent Systems (ISMS'2001)
  A Basic Study on Automated Updating Methodology for Simulation Model of Manufacturing System
  by Dr. He Bai, Kobe University, Japan
  Dr. Susumu Fujii, Kobe University, Japan
  Dr. Toshiya Kaihara, Kobe University, Japan
  Dr. Etsuko Kumamoto, Kobe University, Japan
  • Dynamic Simulation of Flexible Manufacturing Systems by Using SIMULINK(r)
    by Dr. Stjepan Bogdan, University of Zagreb, Croatia
    Dr. Zdenko Kovacic, University of Zagreb, Croatia
    Dr. Nenad Smolic-Rocak, University of Zagreb, Croatia
  • Fault Diagnosis in Manufacturing Systems Using Multiple Intelligent Agents
    by Dr. Terrence P. Fries, Coastal Carolina University, United States
    Dr. James H. Graham, University of Louisville, United States
  • Virtual Production Development
    by Mrs. Sabine Bierschenk, Fraunhofer Institute, Germany
    Dr. Wilfried Sihn, Fraunhofer Institute, Germany
  • A Background to the ARMMS Network
    by Dr. A.J. Medland, University of Bath, United Kingdom
    Dr. S.J. Steiner, University of Birmingham, United Kingdom
    Dr. A. de Vicq, AMTRI,United Kingdom
  • Case Studies in Agility and Re-Configurability from European Manufacturing
    by Dr. A.J. Medland, University of Bath, United Kingdom
    Dr. S.J. Steiner, University of Birmingham, United Kingdom
    Dr. A. de Vicq, AMTRI, United Kingdom
• Flexible Programmable Assembly (ISMT'2001)
  Model of Autonomous Robotic Assembly as Multiagent System
  by Prof. Bojan Jerbic, University of Zagreb, Croatia
  Prof. Božo Vranješ, University of Zagreb, Croatia
  • BioNIC Assembly Systems: Design and Scheduling of Next Generation of Self-organising Complex Flexible Assembly System
    by Prof. Branko Katalinic, Vienna University of Technology, Austria
  • Assessing the Effectiveness of Two Assembly Methods for Parts Recycling
    by Chikako Kaite, Fukui University, Japan
    Yoshiaki Komura, Fukui University, Japan
    Dr. Yasuhiro Yamada, Fukui University, Japan
  • On Variation Minimisation During Aerospace Assembly
    by Lylian Cretin, University of Birmingham, United Kingdom
    Dr. Mozafar Saadat, University of Birmingham, United Kingdom
• Manufacturing Processes (ISMT'2001)
  An Open Structured Intelligent Multi-axis Laser Machining CNC System
  by Dr. Y. L. Tu, University of Canterbury, New Zealand
  Dr. Sheng Q. Xie, University of Canterbury, New Zealand
  Dr. Z.D. Zhou, University of Canterbury, New Zealand
  • New Approach to Foot Orthosis Design And Manufacture
    by Dr. W.M. Granberry, Baylor College of Medicine Houston, United States
    Dr. K. Obrovac, Next Step Footcare, United States
    Dr. Toma Udiljak, University of Zagreb, Croatia
  • Identification and Model Following Control of Fluid Flow in a Pipe using CFD
    by Dr. G. Tabor, Exeter University, United Kingdom
    Dr. N. Taylor, Exeter University, United Kingdom
    Dr. Hongnian Yu, Exeter University, United Kingdom
  • Use of Diamond Turning machine to Build Optical Inserts
    by Mr. Eyup Osman, Rochester Institute of Technology, United States
• Modelling and Control for Robot Manipulator (ISMT'2001)
  Tactile Virtual Reality Using an Array of Bimorph Piezoelectoric Actuators
  by Prof. Hiroshi Koga, Graduate School of Nagoya University, Japan
  Prof. Yasunaga Mitsuya, Nagoya University, Japan
  Prof. Yukihiro Mouri, Toyota Motor Corporation, Japan
  Prof. Masahiro Ohka, Shizuoka Institute of Science & Technology, Japan
  Prof. Tokuhiro Sugiura, Mie University, Japan
  • A Genetic Algorithm Method for Optimal Biped Robot Gait During Walking and a Neural Network Implementation
    by Prof.Dr. L. Barolli, Yamagata University, Japan
    Prof.Dr. Genci Capi, Yamagata University, Japan
    Prof.Dr. K. Mitobe, Yamagata University, Japan
    Prof.Dr. Yasuo Nasu, Yamagata University, Japan
    Prof.Dr. K. Takeda, Yamagata University, Japan
    Prof.Dr. M. Yamano, Yamagata University, Japan
  • Automatic Generation of Models and Programs for Robot-Based Manufacturing Processes
    by Dr. E. Freund, University of Dortmund, Institute of Robotics Research (IRF), Germany
    Dr. Bernd Luedemann-Ravit, University of Dortmund, Institute of Robotics Research (IRF), Germany
    Dr. D. Pensky, University of Dortmund, Institute of Robotics Research (IRF), Germany
  • Improving Geometric Quality of Laser Micromachined Parts Using High-Recision Motion System Dynamic Performance Analysis
    by Dr. Evgueni V. Bordatchev, Integrated Manufacturing Technologies Institute, Canada
    Dr. Suwas K. Nikumb, Integrated Manufacturing Technologies Institute, Canada
  • Modelling of a Rotary Pneumatic Muscle
    by Dr. Abbas Kouzani, Deakin University, Australia
    Dr. Saeid Nahavandi, Deakin University, Australia
• Poster Papers (ISMT'2001)
  A Tolerance Allocation Strategy Suitable for a Concurrent Engineering Environment
  by Dr. M.N. Islam, The Papua New Guinea University of Technology, New Guinea
  • The Powdered Metal Injection Molding process. An Overview of the Capabilities and Drawbacks
    by Mr. William M. Leonard, Rochester Institute of Technology, United States
    Mr. Steven Malena, Rochester Institute of Technology, United States
  • Study on the Electrochemical Micro Deburring of Ultrathin Weaving Plate for Air Jet
    by Ph.D. Jeong- du Kim, Sejong University, Korea
• Process Optimization (ISMT'2001)
  Integrated Modelling and Tooling Compensation for Manufacturing of Blow Moulded Automotive Parts
  by Dr. A. Bardetti, National Research Council of Canada, Canada
  Dr. Robert DiRaddo, National Research Council of Canada, Canada
  Dr. K. K. Kabanemi, National Research Council of Canada, Canada
  Dr. D. Laroche, National Research Council of Canada, Canada
  Dr. M. Milliste, Lear Corporation, Canada
  Dr. T. Szczucki, Ryka Blow Mold, Canada
  • Integrated Product Description Using Relationship between Functional and Geometrical Information for Cooperative Design
    by Dr. Eiji Arai, Osaka University, Japan
    Dr. Mitsuru Chinen, Osaka University, Japan
    Dr. Yasuki Shakudo, Osaka University, Japan
    Dr. Keiichi Shirase, Osaka University, Japan
    Dr. Akira Tsumaya, Osaka University, Japan
    Dr. Hidefumi Wakamatsu, Osaka University, Japan
  • Intelligent Simulation Technologies for the Development of Formed Parts
    by Dr. R. DiRaddo, Industrial Materials Institute, Canada
    Dr. Chantal Gauvin, Industrial Materials Institute, Canada
    Dr. D. Laroche, Industrial Materials Institute, Canada
    Dr. F. Thibault, Industrial Materials Institute, Canada
  • Selective Laser Sintering, A Solid Freeform Fabrication Technique
    by Ms. Dena Aravantinos, Rochester Institute of Technology, United States
    Ms. Joseph DeGuglielmo, Eastman Kodak Company, United States
  • On Performance Evaluation of Ultrasonically Welded Joints in Automobiles
    by Dr. Lingxue Kong, Deakin University, Australia
    Dr. Abbas Kouzani, Deakin University, Australia
    Dr. Saeid Nahavandi, Deakin University, Australia
    Dr. Hieu Trinh, Deakin University, Australia
• Manufacturing Management (ISMM'2001)
  Evolutionary Operation (EVOP) Evaluated by Cusum Charts
  by Dr. Rob W. Walker, Anglia Polytechnic University, United Kingdom
  • Evolution And Integration Of Marketing Information System
    by Dr. Malgorzata Dolinska, Technical University of Lublin, Poland
  • Identification the Out of Control Variable in the Multivariate Processes using the Discriminant Analysis
    by Dr. A. Barreau, Institut des Sciences et des Techniques de l'Ingénieur d'Angers, France
    Dr. Abdessamad Kobi, Institut des Sciences et des Techniques de l'Ingénieur d'Angers, France
    Dr. T. Tiplica, Institut des Sciences et des Techniques de l'Ingénieur d'Angers, France
  • Demand Compliant Enterprise Design
    by Dr. Joaquin Sitte, Queensland Univesity of Technology, Australia
    Prof. Dr. Petra Winzer, Bergische Universität Gesamthochschule Wuppertal, Germany
  • Multivariate Process Control using Self-Organizing Map Algorithm
    by Dr. Boo-Sik Kang, Mokwon University, Korea
    Dr. Sang Chan Park, Korea Advanced Institute of Science and Technology, Korea
  • Industrial Facilities Management
    by Prof. Keith Alexander, Centre for Facilities Management, United Kingdom
    Dr. John Hudson, Centre for Facilities Management, United Kingdom
  • Developing a Domain Specific Web Portal: Web Mining to Create e-Business
    by Dr. Michael Cragg, AmericaGoesOut, Inc., United States
    Dr. Tomas D. Gedminas, AmericaGoesOut, Inc., United States
    Dr. Sean Havens, AmericaGoesOut, Inc., United States
    Dr. Anthony Scime, State University of New York, United States
  • Casting Technology and Information Fusion
    by Dr. Paul Georg, University Magdeburg, Germany
    Dr. Ines Hoffman, University Magdeburg, Germany
    Dr. Sylke Kroetzsch, University Magdeburg, Germany
• Poster Paper (ISMM'2001)
  Cooperation Among Enterprises At Regional Level By The Introduction Of Virtual Factory
  by Prof. Ivica Veza, University of Split, Croatia
• Workshop "Agent- Based Manufacturing Process Planning and Scheduling"
  Agent-Based Manufacturing Scheduling: An overview
  by Dr. Weiming Shen, Integrated Manufacturing Technologies Institute, Canada
  • Multiagent Based Dynamic Resource Scheduling for Distributed Multiple Projects Using a Market Mechanism
    by Dr. Soundar R. T. Kumara, The Pennsylvania State University, United States
    Dr. Yong-Han Lee, The Pennsylvania State University, United States
  • Negotiation-Based Routing in Job Shops via Collaborative Agents
    by Dr. John M. Usher, Department of Industrial Engineering, United States
  • Agent-Based Decision Making for Distributed Process Planning
    by Dr. Weiming Shen, Integrated Manufacturing Technologies Institute, Canada
    Dr. Lihui Wang, Integrated Manufacturing Technologies Institute, Canada
  • Multi-Agent Process Coordination for Supply Chain Management
    by Dr. Giuseppe Confessore, Instituto di Tecnologie Industriali e Automazione, Italy
    Dr. Stefano Giordani, Università di Roma "Tor Vergata", Italy
    Dr. Giuseppe Stecca, Instituto di Tecnologie Industriali e Automazione, Italy
  • The Fabricare Scheduling Society
    by Dr. Paulo Sousa, Instituto Superior de Engenharia do Porto, Portugal
    Dr. Carlos Ramos, Instituto Superior de Engenharia do Porto, Portugal
    Dr. José Neves, University of Do Minho, Portugal
  • A Multi-Agent Architecture for Dynamic Scheduling of Steel Hot Rolling
    by Dr. Peter Cowling, University of Nottingham, United Kingdom
    Dr. Djamila Ouelhadj, University of Nottingham, United Kingdom
    Dr. S. Petrovic, University of Nottingham, United Kingdom
  • Job Sequencing and Dispatching in Multi-agent Heterarchical Control Systems
    by Dr. Robert W. Brennan, University of Calgary, Canada
    Dr. O. William, University of Calgary, Canada
    Dr. Douglas H. Norrie, University of Calgary, Canada
    Mr. Scott Walker, University of Calgary, Canada
• Additional Papers
  • Valuing Private Companies: A DEA Aprroach
    by Dr. Joseph C. Paradi, Univesity of Toronto, Canada
    CIMA'2001 (ACFM 2001 symposium)
  • Based on User Model Neural Network
    by Dr. Jong-Gil Song, Pusan National University, Republic of Korea
    ISA'2000